1.Before starting the road test, first check the completion of warranty items and the condition around the wheels, check the oil and water, tighten the parking brake, shift to neutral and press the clutch pedal before starting. After starting, slowly release the clutch pedal and pay attention to whether the instrument is working properly.
2.Before starting, the car door must be closed and the seat belt must be fastened. Before the road test, ensure that the braking system is working reliably
3.When reversing, it is necessary to have a clear view of the passage before and after, and contact the reversing personnel to follow their instructions.
4. The test vehicle must be equipped with test license plates in front and behind, and a suitable location must be selected for the road test. The number of accompanying personnel participating in the road test shall not exceed 3.
5. When stepping on the brake pedal for emergency braking, it is necessary to first signal to the personnel on board before conducting the test to avoid injury to those on board.
6. After the test drive is completed, the relevant parts should be checked again according to regulations. After all the inspected items are qualified, park the vehicle at the designated location, shift the manual transmission lever to the low gear, place the automatic transmission lever in the P position, and tighten the parking brake. Finally, notify the car owner to come and pick up the car.