main points:
Before starting work, it is necessary to check whether the tools used are intact and undamaged. During construction, the tools must be neat and not placed randomly on the ground. After work, the tools should be counted, checked, and wiped clean, and placed in the tool cart or toolbox as required.
2. When disassembling and assembling parts, appropriate tools or specialized tools must be used. Do not use excessive force or directly strike the parts with a hammer. All parts must be neatly arranged in a certain order after disassembly, and must not be stacked on the ground. The disassembly vehicle must ensure that oil, water, and parts do not fall to the ground, and keep both hands, parts, tools, and the site clean.
3. Waste oil should be collected in designated waste oil drums and should not be spilled or poured into drainage ditches to prevent waste oil pollution.
4. During repair work, attention should be paid to protecting the car's paint surface. If necessary, protective pads and seat covers should be used for carpets and seats to maintain the cleanliness of the repaired vehicle.
5. Smoking is not allowed when repairing or cleaning parts with gasoline in the car; Not allowed to repair cars
Bake the parts nearby or light the blowtorch, etc.
When using a jack for chassis operations, a flat and solid site must be selected, and the front and rear wheels must be secured with triangular blocks. Then, a vehicle support bench should be used to stabilize the vehicle. It is strictly prohibited to simply use a jack to lift the vehicle for operations under the vehicle. When loosening the jack, it is necessary to first check whether there are people under and around the vehicle. Only when it is confirmed that all personnel are in a safe position can the jack be loosened.
7. During the repair process, it is necessary to carefully inspect whether the original or replacement parts meet the technical requirements, and strictly follow the repair technical specifications to carry out construction, inspection, and debugging.
When directing the vehicle to move or move, it is not allowed to stand in front or behind the vehicle, and attention should be paid to surrounding obstacles